ASTM A213 TP321 チタン安定化ステンレス鋼熱交換器チューブブライトアニール 19.05 ミリメートル外径化学プラント用
Product Details
| 材質グレード: | ASTM A213 TP321 (UNS S32100) | 外径: | 19.05mm (3/4インチ) |
|---|---|---|---|
| 肉厚: | 2.11mm (最小) | 長さ: | 最大25000mm |
| 製造工程: | シームレス冷間引抜/冷間圧延 | 安定化要素: | チタン安定化 (5xC min) |
| 表面仕上げ: | 光輝焼鈍、Ra ≤1.6μm | 熱処理: | 摂氏1040～1095度で溶体化アニール |
| ndtテスト: | 100%UT、渦電流、PMI、表面粗さ試験 | ||
| ハイライト |
TP321 ブライトアニール、熱交換器ステンレス、19.05mm 化学グレード,Heat Exchanger Stainless,19.05mm Chemical Grade |
||
Product Description
- 優れた表面品質:Ra≤1.6μmの光輝焼鈍仕上げにより汚れが減少し、熱伝達率が向上します
- 酸化物のない表面:保護雰囲気焼鈍によりスケールの形成が除去され、酸洗は不要です
- チタン安定化:臨界鋭敏化温度範囲での粒界腐食と溶接部の腐食を防止します。
- 完全な耐食性:有機酸、硝酸、および塩化物を含む環境に対する優れた耐性
- 清浄度認定:酸素サービス用の ASTM G93 レベル C に準拠したオイルフリー、グリースフリー、粒子フリー
| パラメータ | 仕様 |
|---|---|
| 標準 | ASTM A213 / ASME SA213 TP321 |
| UNS番号 | S32100 |
| 抗張力 | ≧515MPa |
| 降伏強さ | ≧205MPa |
| 伸長 | ≥35% |
| 粒度 | ASTM No.5以上 |
Product Highlights
ASTM A213 TP321 チタン安定化ステンレス鋼シームレス熱交換器チューブ。光沢焼きなまし仕上げで、腐食性の化学処理環境向けに設計されています。
高周波溶接のカスタマイズされた石炭は蒸気ボイラの部品を積み重ねるエコノマイザのコイルを始動させた
High Frequency Welding Customized Coal Fired Steam Boiler Parts Stack Economizer Coil Boiler economizer Boiler Economizer is the energy improving device that helps to reduce the cost of operation by saving the fuel. The economizer in Boiler tends to make the system more energy efficient. In boilers, economizers are generally designed to exchange heat with the fluid, generally water. The exhaust from the boilers is generally in the temperature range of 200°C – 250°C, so there
エコノマイザの熱伝達のための高周波溶接のボイラー螺線形のひれ付き管
High Frequency Welding Boiler Spiral Fin Tube For Economizer Heat Transfer Boiler economizer Boiler Economizer is the energy improving device that helps to reduce the cost of operation by saving the fuel. The economizer in Boiler tends to make the system more energy efficient. In boilers, economizers are generally designed to exchange heat with the fluid, generally water. The exhaust from the boilers is generally in the temperature range of 200°C – 250°C, so there are a huge
動力火車の実用的な植物のための熱交換器Hのタイプ ボイラー部品の管
High Efficient Heat Exchang H Type High Temperature Resistance Boiler Parts For Utility/Power Station Plant Product Introduce H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins(fins of butterfly piece)creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface.H-fin Tubes also have a high rate of fusion welds and weld tensile strength.H-fin Tube is assembled with the H
延長暖房の産業発電所のボイラーのための表面のボイラーひれ付き管
Energy Saving Extension Heating Surface Boiler Fin Tube For Industrial Power Plant Boiler Product Description H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins(fins of butterfly piece)creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface. H-fin Tubes also have a high rate of fusion welds and weld tensile strength.H-fin Tube is assembled with the H economizer,
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
